Chat with us, powered by LiveChat

WN3000RP – Universal WiFi Range Extender

Hardware Features

The LEDs on the front show how the Extender is working.

WPS: The LED indicates a wireless connection.
PC to Extender: The LED is lit when the Extender is connected to a PC.
Status: This LED is lit when the Extender is powered on.
Link Rate: This LED indicates a wireless connection between the Extender and the router.
– Green is best.
– Amber is good.
– Red is poor.

Note: For best performance, position antennas pointing up.

netgear wn3000rp

The side panel has the following features:

  • On/Off button: Turns the device on and off.
  • WPS button: Press the WPS button to wirelessly connect the Extender to your router or wireless adapter.
  • Factory Reset button: To use this button, stick a paper clip into the reset hole and hold it until the Status LED flashes.
  • Ethernet port: You can connect a computer or other device to this port as described in the User Manual.

Getting Started

The WiFi Range Extender extends the wireless network to include the area outside the range of your existing Wi-Fi network. Follow these steps to correctly set up the Extender.

Place the Extender and Apply Power
  • Place the Extender an equal distance between your router and the wireless device located outside the range of your router.

netgear wn3000rp

  • Plug the Extender into an electrical outlet, and wait 1 minute until the Extender starts. The Status LED turns green.

Netgear WN3000RP Setup – Netgear Installation Assistant

To set up your extender using the Netgear installation assistant:

  • Turn on your extender.
  • Place the extender close to your WiFi router.
  • After that, plug the extender into an electrical outlet.
  • Wait for the Power LED to light green.
  • If the Power LED does not light, press the Power button.
  • Connect a computer or mobile device to the extender using a WiFi or Ethernet connection:
    • WiFi – On your WiFi-enabled computer or mobile device, open the WiFi connection manager and locate and connect to the extender network. When your WiFi-enabled computer or mobile device is connected to the extender, the Client LED lights solid white.
    • Ethernet – Use an Ethernet cable to connect the Ethernet port on the extender to an Ethernet port on your computer.
  • Launch a web browser from a computer or mobile device and enter www.mywifiext.net. If mywifiext.net not working on your device, contact our experts for quick help at toll-free 1-855-844-0144.
  • The Netgear installation assistant displays.
  • Follow the prompts to connect your extender to the existing WiFi network.
  • Move your extender to a new location that is about halfway between your router and the area with a poor WiFi signal.
  • If you get no connection or a poor connection, move the extender closer to your router and try again until the Link Status LED lights white.
  • After you find the best location for your extender, connect your client devices to the extended WiFi network.
If you still can’t set up your Netgear Nighthawk WN3000RP Extender, get in touch with the experienced technicians at 1-855-844-0144 (Toll-Free).

Netgear WN3000RP Setup – WPS Push Button

To set up your Nighthawk WiFi Extender using WPS:

  • Power on the extender.
  • Place the extender and WiFi router in the same room.
  • Once done, plug your extender into an electrical outlet.
  • Wait for the Power LED on WN3000RP to light green.
  • Press the WPS button on the extender.
  • Now, press the WPS button on your WiFi router.
  • If the Netgear WN3000RP Link Status LED lights white, the connection between your router and extender is good.

Note: If your router supports the 5 GHz band, your extender attempts to connect to the router’s 5 GHz band the first time you press the WPS button. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during extender setup. To resolve such issues at the earliest, give us a call at toll-free 1-855-844-0144.

  • Move your extender to a new location that is about halfway between your router and the area with a poor router WiFi signal.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your WiFi-enabled computer or mobile device to the extended network. Your extender uses the same WiFi network settings as your router for its 2.4 GHz and 5 GHz extended networks.

That’s how you can complete your Netgear WN3000RP Setup using WPS button. If you come across any type of technical issue during the setup process, feel free to contact the experts at 1-855-844-0144.

wn3000rp

How to Configure FastLane Technology on Netgear WN3000RP Extender

FastLane Technology provides you with maximum WiFi performance. Basically, it offers high-speed WiFi connection with a dedicated band connecting the WiFi router to your WN3000RP extender and a second band connecting the WiFi device and extender. Please follow these steps to configure FastLane Technology on your Netgear Extender:

  • Connect your client device to the extender.
  • After that, open any web browser such as Microsoft Edge, Google Chrome or Internet Explorer.
  • Type mywifiext.net in the address bar and press Enter key.
  • Enter the username and password when the login window appears.
  • On the Netgear Genie page, click on ‘Do More’ and then on ‘FastLane’ option.
  • Now, you will get two options: ‘Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only’ and ‘Device-to-extender in 5 GHz only and extender-to-router in 2.4 Ghz’.
  • Select any option you like and click on the Save button.
In case you stuck at any step while enabling the FastLane Technology on your extender, don’t hesitate to contact the experts at 1-855-844-0144 for on-the-spot solution.

Common Issues During Netgear EX3920 Setup

  • Can’t login to Netgear WN3000RP extender
  • WN3000RP drops internet connectivity
  • Unable to update Netgear firmware
  • Can’t access mywifiext.net after update on WN3000RP
  • MAC address filtering errors
  • Nighthawk WN3000RP not working failed update
  • WiFi extender not connecting to internet
  • Can’t find Netgear range extender network name
  • Netgear Extender not working
  • Nighthawk WN3000RP – no internet
  • Netgear extender red light causing issues
  • Unable to perform Netgear extender reset
  • Internet connected but not working
  • Mywifiext.com doesn’t open
  • Mywifiext.net not working
  • Incorrect mywifiext password
  • WiFi extender is connected but no internet
  • Can’t connect to mywifiext.local
  • WiFi extender is not connected to the network
  • Netgear genie app doesn’t open
  • Issues while accessing 192.168.1.250 IP address
  • Lost configuration CD
  • WiFi connectivity issues
  • Netgear genie smart setup page continues to appear even after Netgear extender setup
  • Forgot Netgear extender default password
  • Extender’s LED lights are not stable

mywifiext.net

Fix all such issues within minimal time by calling the experts at toll-free 1-855-844-0144.

Troubleshooting Netgear WN3000RP Setup Issues

Go through the below-mentioned troubleshooting steps to fix Netgear WN3000RP setup issues:

  • Make sure that the extender is receiving proper power supply from the wall outlet.
  • Confirm that the wall plug in which the extender is plugged in is not damaged or short-circuited.
  • Access high-speed internet connection on your device.
  • Check all the wired connections. Do not use any damaged cable.
  • Keep your extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
  • If you are getting issues with mywifiext.net, be certain that you entered the correct URL in the address bar.
  • Power-cycle your Netgear extender once and try to set it up again.
  • Use only the latest version of web browser during mywifiext.net login.
  • Update the latest Netgear firmware version on your extender.
  • Reset the extender to its factory default settings.
None of the aforementioned troubleshooting tips resolve your issues? Don’t panic. Just give us a call at 1-855-844-0144 and fix your extender setup issues.

How to Update Firmware on Netgear Extender?

Does your WiFi extender, all of sudden, start behaving weirdly? Is it not providing the required speed even after a successful Netgear WiFi extender setup? If yes, then update firmware on Netgear WN3000RP Extender right away.Netgear Extender Firmware is a set of instructions integrated into the hardware device. Talking in a layman’s language, Netgear extender firmware is basically an operating system specifically intended to run on your particular make and model number of extender.So make sure to have the latest firmware version on your extender. Here’s how to upgrade the firmware on your Netgear range extender:

  • First and foremost, turn on your WiFi extender.
  • Connect a PC, laptop or mobile device to the extender’s network.
  • Once done, open a web browser as per your choice.
  • Enter mywifiext.net in the address bar and press enter key.
  • Log in to your extender using the username and password.
  • Go to the settings menu and click on Firmware Upgrade option.
  • Thereafter, click on Check button.
  • If there is any new firmware version available, click on yes button for firmware upgrade.
  • Now, wait for some time and let the Netgear extender firmware update properly.

That’s it! Your extender’s firmware has been updated. In the case of any difficulty, feel free to contact the experts at 1-855-844-0144 (24×7 Helpline).

WN3000RP Extender Technical Specification

WiFi Tech and Range N300 Range
WiFi Technology 802.11n
WiFi Performance N300 (300 Mbps)†
WiFi Band 2.4GHz
Key Features
  • Extend Internet access for wireless devices like iPads®, iPods®, laptops, smart phones, game consoles and TVs
  • Repeats 2.4 GHz Wi-Fi signals from devices made by NETGEAR® and other brands
  • Smart LED indicators helps find the best location for optimal WiFi coverage
  • Fast Ethernet port to connect home A/V devices to the network
Disclaimer: my-wifiextnet.net is an independent technical support service provider. Any kind of use of Products, Trademark, Services and Brands are just for educational purpose. my-wifiextnet.net has no affiliation or certification with any of company unless such bond is expressly specified.
error: Content is protected !!